MENU

How to Install your Stat

Amber-Pro Installation Guide

Amber-Touch Installation Guide

DEVIreg Touch Installation Guide

 

The installation of our thermostats must be done by an authorised and qualified installer in accordance with IEE 17th Edition wiring regulations and the installation must conform to Part P of the Building Regulations 2005. When installing a thermostat, please refer to the specific thermostat installation guide.

When mounting a thermostat, please pay attention to the details below:

 

  • Place the thermostat at a suitable height on the wall, usually at the same height as light switches
  • The thermostat should not be placed on the wall in WC, bathrooms, shower rooms, en-suites or wet rooms. Place it in an adjacent room, and always place the thermostat according to local regulation on IP classes
  • DO NOT place the thermostat on the inner side of an exterior wall
  • Always install the thermostat at least 50cm from windows and doors
  • DO NOT place the thermostat in a way that it will be exposed to direct sunlight
  • A floor sensor enables accurate temperature control and should be used in all electric floor heating applications, particularly under wooden floors to reduce the risk of over-heating the floor

 

IMPORTANT: When the thermostat is used to control a floor heating element in connection with a wooden floor or similar material, the maximum temperature should not be set to more than 35°C.